Electro Lock vs Manual Lock 2 Post Lift, Explained
Short answer: on a 2 post lift with electro locks, the safety latches are pulled clear by electric solenoids when you press the down button, so lowering is one button and you never walk round the posts. With manual locks you release the latches by hand before lowering. Both hold the parked car on steel, not on hydraulics, so neither is safer by design. Our 5 Ton Electro Locks 2 Post Lift costs £2,200 delivered (£2,600 installed), £200 more than the 5000kg 2 Post Lift with the same capacity. The extra money buys speed and convenience, which matters most in a busy workshop.
What the locks on a 2 post lift actually do
A 2 post lift has two jobs that are often confused. The hydraulics raise and lower the car. The locks hold it. Inside each post a row of steel lock positions runs up the column, and a spring-loaded latch on each carriage drops into them as the lift goes up. That is the clicking you hear when a lift rises.
When you reach working height, you lower the carriages a little until the latches sit on the nearest lock position. From then on the weight of the car is carried by steel, not by oil pressure in a cylinder. Hoses, seals and valves can fail; a latch sitting on a steel stop does not depend on them. This is the most important safety habit on any lift: always lower onto the locks before you go underneath.
How manual locks work
- Raise the car. The latches click over the lock positions on the way up.
- Lower slightly onto the locks. Now you can work.
- To come down, raise the lift a little so the latches are off the stops.
- Release the latches by hand. Depending on the lift, that is one handle that releases both posts, or a release on each post (a double-point release).
- Hold the lowering control until the car is down.
It works well and there is very little to go wrong: a cable, a lever and a spring. The downside is time and walking. On a double-point release you may have to go to both posts every time you lower the car.
How electro locks work
Electro locks use the same kind of steel latches, but each one is pulled clear by a solenoid, a small electromagnet, instead of a cable. On our 5 Ton Electro Locks 2 Post Lift the operation is one button up, one button down. Press down and the lift releases the locks electrically and lowers.
On solenoid systems generally, the latches are spring-loaded towards the locked position and only pulled back while the solenoid is powered. If the power goes off, the springs push the latches back into lock. The exact sequence and the procedure for lowering during a power cut are in the manual of the lift: read that section before you need it, not during a power cut with a car in the air.
Manual and electro locks compared
| Manual locks | Electro locks | |
|---|---|---|
| How locks engage | Automatically as the lift rises | Automatically as the lift rises |
| How locks release | By hand, a lever or handle on the lift | Electrically, when you press the down button |
| Walking round the lift | Needed on a double-point release | Not needed |
| Time per lowering | Longer | Shorter |
| Extra parts to check | Release cables, levers, springs | Solenoids, wiring, switches, springs |
| Holds the load when parked | Steel latches | Steel latches |
| Best for | Home garages, occasional use | Busy workshops, many lifts a day |
What our 2 post lifts have
Every lift we sell has safety locking. What differs is how you release it and what extra safety features come with it. This is what each product page states:
| Lift | Locks and controls (from the product page) | Delivered |
|---|---|---|
| 4000kg 2 Post Lift | Arms lock on lifting, hold-to-run controls, pressure relief valve | £1,700 |
| Short/Narrow 3500kg 2 Post Lift | Mechanical carriage safety device, arm locking system, end limit switch | £1,700 |
| 5000kg 2 Post Lift | Lowering performed manually, adjustable top limit | £2,000 |
| 5 Ton Electro Locks 2 Post Lift | Electro solenoid locks, one button up and one button down | £2,200 |
| 6 Ton 2 Post Lift | Double-point release with dual safety design | £2,800 |
Note the difference between arm locks and carriage locks. Arm locks stop the swing arms from moving sideways once the car is lifted, so the pads cannot slide off the lifting points. Carriage locks, the latches in the posts, hold the height. A good lift has both.
Who should pay for electro locks
The 5 Ton Electro Locks 2 Post Lift makes most sense when:
- The lift works all day. In a workshop doing ten, fifteen or twenty lifts a day, a few seconds saved on every lowering add up to real time.
- One person runs the bay. Walking to both posts and back with tools in your hands is where people take shortcuts. One button removes the temptation.
- You want simple controls. One button up, one button down is easy to teach to a new mechanic or an apprentice.
- You need 5 tonnes anyway. It has 5,000kg capacity, double-cylinder hydraulics, triple arms, a 1,800mm maximum lifting height and a low minimum pad height.
For a home garage that lifts a car a few times a month, the 4000kg 2 Post Lift at £1,700 or the 5000kg 2 Post Lift at £2,000 does the same job for less. For heavy vans and continuous use, the 6 Ton 2 Post Lift with its double-point release and dual safety design is the step up.
All five models compared side by side: 2 post lift buying guide.
Three myths about electro locks
- "Electro locks are safer." Not in themselves. Both types hold the car on steel latches. Safety comes from lowering onto the locks every time and checking they engaged on both posts.
- "If the power fails, the car comes down." No. The hydraulics hold the car, and on solenoid systems the latches are spring-loaded into lock. Lowering without power is a manual procedure in the manual.
- "Electro locks need no maintenance." They need different maintenance. Solenoids, wiring and switches must be checked as well as the latches and springs.
Paying for it: buy online with card, Apple Pay, Shop Pay or Klarna (pay in 3 interest-free payments or spread the cost), or order by phone or WhatsApp and pay the driver on delivery by card, bank transfer or cash. See payment terms.
Checks for both lock types
Whatever system your lift has, these checks take two minutes and are worth doing at the start of every working day:
- Listen on the way up. The latches on both posts should click at the same time. Clicks out of step mean the carriages are not level.
- Look after lowering onto the locks. Both latches should be fully seated on a lock position, at the same height.
- Check the return. After releasing, the latches must spring back freely. A sticky latch needs cleaning and lubrication.
- Manual locks: check the release cable or linkage for fraying, stretch and correct adjustment.
- Electro locks: check the solenoids pull in cleanly on both posts and look over the wiring where it runs near moving parts.
- Everything else: hydraulic hoses for leaks, arm locks, rubber pads, and anchor bolts.
Our car lift safety checklist and car lift maintenance guide cover these in more depth, and how to use a 2 post lift walks through a full lift from setting the arms to lowering.
Can you add electro locks to a manual lift later?
Not as a simple home job. The lock mechanism, wiring and control box are designed together, and changing them affects how the lift's safety devices work. If you think you will want one-button lowering in the future, it is cheaper and safer to buy the 5 Ton Electro Locks lift from the start than to modify another lift later. If you already own a lift and the release is slowing you down, call us and we will talk through the options for your model.
If the locks do not engage or release
- Stop. Do not work under the car until both posts are on their locks.
- Check that nothing is in the column: rags, cable ties, a dropped tool.
- On electro locks, check power to the lift and that the solenoids click when you press down.
- On manual locks, check the release cable has not slipped or stretched.
- If it is not an obvious fix, call us with the model and what is happening. Parts are covered by the warranty of your lift.
Questions and answers
What are electro locks on a 2 post lift?
Safety latches released by electric solenoids instead of a hand lever. You press the down button and the lift releases the locks and lowers, with no walking round the posts.
Are electro locks better than manual locks?
They are faster and easier in daily use, which matters in a busy workshop. They are not safer by design: both types hold the car on steel latches when it is lowered onto the locks.
What happens to an electro lock 2 post lift in a power cut?
On solenoid systems the latches are spring-loaded into lock, so the lift stays put. The manual describes how to lower it without power.
How much is a 2 post lift with electro locks?
Our 5 Ton Electro Locks 2 Post Lift is £2,200 delivered or £2,600 delivered and installed. Extra supports are available for £300.
Do I need to lower a 2 post lift onto the locks?
Yes, every time before you go underneath. The locks carry the weight on steel so you are not relying on hydraulic pressure.
Not sure which lift fits? Call us on 020 8220 9986 or message us on WhatsApp 07811 247454, every day 9am to 9pm. Send your ceiling height, floor and the cars you work on, and we will tell you which lift fits.